Scales

CR 6374 leads SEPY-9 at Manville, NJ in September of 1980

Conrail Potomac Yard bound SEPY-9 leaves the former Lehigh Valley Lehigh Line to enter the former Reading Trenton Line passing the Un-Coupled In Motion Scale at Manville, NJ Yard 9/09/1980

Denhom, PA Weigh-in-Motion Scale

The weigh-in-motion scale at Denholm on the Pittsburgh Line, milepost 155. Mostly the same as it was under Conrail I believe.

FGWX 200000 Reading, PA 3/80

FGWX 200000 former NBS 200000 calibrating the Reading Master Scale. Weight used so far 50,000lbs. Buggy weighs 10,000 as does each weight. Buggy and weights are maintained at the National Bureau of Standards facility Clearing IL.

Conrail Scale Inspector Gerry Davis (without hat) and FGIS Inspector Ben Banks discuss the next procedure. Large building was the Reading Co. Carpenter Shop.

Lewistown Junction Scalehouse

The Scalehouse sat behind the station along the line to Burnham and Standard Steel. No longer exists.

Lewistown Junction Scalehouse

The Scalehouse sat behind the station along the line to Burnham and Standard Steel. No longer exists.

Portland, PA _7/76

Portland, Pa yard office and scale. Was used until the installation of the Allentown Hump Scale.

If you find this site worthwhile:
Please Consider Making a Donation To The CRHS

Amount: 

Like this site?

If you're a fan of Conrail, and you find this site useful, please consider supporting The CRHS with a donation or membership.

Want more CRHS content? Join our mailing list to keep up with what's going on with the society.